|
AAA Oar Tether
|
|
Oar Tower by AAA
|
|
AAA Oar Tower Set
|
|
AAA Price: $19.95
|
|
|
|
AAA Price: $29.95
|
|
|
|
As low as: $105.95
|
|
|
|
|
|
|
Don't lose your oar. During an unexpected release from your pin or oarlock, this oar tether gives you a fighting chance to get the oar back in before the next wave. Stainless-steel ring with polypro strap secures the tether to the oar, a heavy duty Ancra cam buckle with a loop attaches to your frame or oar tower.
|
Head is cast of 356 aluminum alloy (hardened) and shaped for tremendous strength and uncompromising stiffness, welded to a piece of T-6 aluminum, AAA Oar Mounts will hold up for a very long time. They're the most versatile oar mount around. You can adjust their working height by rotating them around the circumference of the rails or shortening tower height. These mounts can be made in any height needed, call for details
|
Head is cast of 356 aluminum alloy and shaped for tremendous strength and uncompromising stiffness, welded to a piece of T-6 aluminum, AAA Oar Mounts will hold up for a very long time. They're the most versatile oar mount around. You can adjust their working height by rotating them around the circumference of the rails. These mounts can be made in any height needed, call for details
|
|
|
|
SPARE OAR KEEPER
|
|
NRS Atomic Aluminum Oarlocks
|
|
Oar Right BladeRite
|
|
AAA Price: $29.95
|
|
|
|
Our Price: $37.95 Each
|
|
|
|
Our Price: $14.95
|
|
|
|
|
|
|
You're prepared for the worst by bringing along a third & maybe a fourth oar, but you'll need quick access to it when you have to move fast. The perfect solution is an AAA Spare Oar Keeper™ with its metal quick-release fastener and large steel ring. Fits Carlisle and Cataract Oars.
|
The ultra-strong, drop-forged NRS Atomic Aluminum Oarlock combines state-of-the-art technology with time-tested design. Pound for pound, this is the lightest, toughest oarlock out there.
|
BladeRite Oar Stop
|
|
|
|
Oar Stirrup
|
|
OAR TETHER
|
|
SPARE OAR KEEPER
|
|
AAA Price: $11.95
|
|
|
|
AAA Price: $43.95
|
|
|
|
AAA Price: $24.95
|
|
|
|
|
|
|
Oar Stirrups prevent oars from getting away during tough maneuvers. Made with rigid white polyethylene.
|
Don't lose your oar. During an unexpected release from your pin or oarlock, this 3' polypro strap gives you a fighting chance to get the oar back in before the next wave. Stainless-steel rings secure the tether to oar mounts and oars. Quick-release 1" buckle for removing the oar when needed.
|
You're prepared for the worst by bringing along a third oar, but you'll need easy access to it when you have to move fast. The perfect solution is an NRS Spare Oar Keeper™ with its quick-release side buckle and large O-ring. Will fit Carlisle and Cataract Oars.
|
|
|
|
Sawyer Cobra Oarlock - Standard
|
|
SUPERSTON OARLOCKS by NRS
|
|
OAR RIGHT
|
|
Our Price: $52.95
|
|
|
|
Our Price: $42.95
|
|
|
|
AAA Price: $17.95
|
|
|
|
|
|
|
This is the oar lock you've been waiting for. Stronger, more durable, more range of motion.
|
Made of Superston™, the strongest bronze alloy of its kind, these oarlocks are the finest for whitewater rowing. The horn opening is 1-5/8" with a 2-3/8" inside diameter. Shaft is precision-turned and drilled for a split ring. Oars with rope wraps or oar sleeves can sometimes fit snugly in oarlocks. Compare the measurements under the Specs tab to those of your oar shaft to ensure a good fit with these oarlocks.
|
Keeps your oar blade in the right position for full-power strokes.
|
|
|
|
MOLDED OAR SLEEVE
|
|
COUNTER BALANCE OAR SHAFT WEIGHTS
|
|
NRS OAR MOUNTS
|
|
AAA Price: $15.95
|
|
|
|
Our Price: $79.95
|
|
|
|
Our Price: $88.95
|
|
|
|
|
|
|
Protect your oar and tighten the open oarlock system with Molded Oar Sleeves. Injection molded polyethylene. Length 11"; inside diameter 1 7/8"; fits Carlisle HD or Cataract oar shafts. We recommend the use of Oar Rights or large Plastic Stoppers with your Molded Oar Sleeves.
|
Counter balance your oars without buying new ones! These 4 lb. steel sleeves slide easily over the end of the oar, fasten securely to the shaft anywhere you want and are completely removable. This river tool is fully adjustable and will enable you to offset the weight of the oar outside your oarlocks. You can custom adjust these weights for multiple rowers, personal preferences, or for different rowing conditions. These will definitely save some wear and tear on the arms over the course of a long day (or week) on the water. Sleeves are secured to the oar with three 1/4"-20 x 1/2" length nylon pan head screws. Ideal for oars longer than nine feet.
|
Cast of 356 aluminum alloy and shaped for tremendous strength and uncompromising stiffness, NRS Oar Mounts will hold up for a very long time. They're the most versatile oar mount around. You can adjust their working height by rotating them around the circumference of the rails. These oar mounts stand 8" tall.
|
|
|
|
REPLACEMENT CARLISLE FOAM OAR GRIP
|
|
STEEL OARLOCK STANDS
|
|
OAR STOPPERS
|
|
Our Price: $3.95
|
|
|
|
Our Price: $59.95
|
|
|
|
Our Price: $29.95
|
|
|
|
|
|
|
Reduce fatigue and prevent blisters! Grips fit Carlisle, Cataract and most other oar handles. Installation tip: Use hair spray to lubricate the inside of the grips, then just slide them on!
|
Stand has a 5 1/4" x 6" base with 4 mounting holes and a 6" rise. Opening is 5/8" inside diameter; allows NRS open oarlock or NRS pins and clips.
|
If you are not using oar rights, plastic stoppers will position and keep your oars where you want them to be. Use 1400 L, large stoppers with Molded Oar Sleeves.
Sold in pairs.
|
|
|
|
RUBBER OAR STOPPERS
|
|
Extra Clip With Clamps to fit PVC sheathed thole pins
|
|
Oar Thole Pin & Stirrup Combination
|
|
Our Price: $9.95
|
|
|
|
AAA Price: $21.95
|
|
|
|
Our Price: $27.95
|
|
|
|
|
|
|
The Rubber Oar Stopper keeps your oar shaft from sliding through the oarlock. Fits both Carlisle and Cataract oar shafts.
|
These steel clips are powder-coated to a tough and attractive black finish. These clips are sized to fit over a PVC covered thole pin. The PVC keeps the noise down and serves to protect your clip from premature wear. Keep an extra Clip and set of clamps in your repair kit or on your spare oar. Stainless steel hose clamps included.
|
The Oar Pin system is for folks who want a higher pivot point for their oars. When you want your oars held firmly in the vertical position - even in the biggest whitewater, you'll need pins and clips. A molded rubber safety bumper on top prevents injury. Replaceable PVC bushings protect pin and clip from wear. It's wise to carry a spare pin and clip assembly in your repair kit.
|
|
|
|
Oar Thole Pin & Stirrup Combination Pair
|
|
|
|
|
|
Our Price: $54.95
|
|
|
|
|
The 12" Oar Pin and Clip Set is for folks who want a higher pivot point for their oars. When you want your oars held firmly in the vertical position - even in the biggest whitewater, you'll need pins and clips. A molded rubber safety bumper on top prevents injury. Replaceable PVC bushings protect pin and clip from wear. Don't forget your spare oar clip, it's wise to carry a spare pin assembly in your repair kit.
|
|
|
