|
CARLISLE OAR SHAFTS
|
|
CATARACT MAGNUM OAR BLADE
|
|
Our Price: $77.95
|
|
|
|
AAA Price: $67.95
|
|
|
|
|
Proven around the world, Carlisle's tough, maintenance-free, quality aluminum shafts give you maximum strength and performance. The 1-7/8" diameter thick-walled tempered aluminum tubing is sheathed in colorful, abrasion-resistant polyethylene tubing. 8' and longer oars have reinforced inner shafts for extra-duty strength. Rubber grips cushion the molded plastic handles. Removable blades permit easy storage and transport.
Shaft size is measured with blade attached
Blade sold separately
Oversize shipping charges apply
|
Now the blade insert has groves along all edges so that it is easier to remove blade from shaft. Whether you're fishing or whitewater rafting, these buoyant blades are a welcome addition. Structural polyurethane coating around a lightweight composite core. 7" Magnum blade incorporates the strength of the original with a teardrop design: wider tip and thinner cross-section enters the water quicker and reduces flutter. Black only.
|
|
|
|
CARLISLE OUTFITTER BLADE 6.5"
|
|
CARLISLE OUTFITTER BLADE 8"
|
|
AAA Price: $63.95
|
|
|
|
AAA Price: $63.95
|
|
|
|
|
|
Rugged and light, Carlisle Outfitter blades are constructed of tough, UV-resistant plastic with a full-length tempered aluminum spine for superior strength, and a strong insert to withstand aggressive boating. A push-button mechanism locks the blade securely to either a Carlisle or Cataract shaft. This Outfitter blade is 6-1/2" wide. Black only
|
Rugged and light, Carlisle Outfitter blades are constructed of tough, UV-resistant plastic with a full-length tempered aluminum spine for superior strength, and a strong insert to withstand aggressive boating. A push-button mechanism locks the blade securely to either a Carlisle or Cataract shaft. This Outfitter blade is 8" wide.
|
|
|
|
CARLISLE ECONOMY PADDLE
|
|
CARLISLE STANDARD PADDLE
|
|
Our Price: $20.95
|
|
|
|
Our Price: $30.95
|
|
|
|
|
|
Lightweight and durable, this is the perfect all-purpose paddle. An 8" X 20" blade adds power to your stroke. A tempered-aluminum shaft with a 13" HDPE grip for sure handling. Blade and T-grip are molded of high impact polypropylene.
|
The industry standard for strength and durability, with an 8" x 20" blade. An aluminum-clad shaft provides power and reduces maintenance. Comes in T-grip. Available in many colors for outfitters & liveries with minimum order quantities.
|
|
|
|
CARLISLE OUTFITTER PADDLE
|
|
CARLISLE GUIDE PADDLE
|
|
AAA Price: $37.95
|
|
|
|
AAA Price: $66.95
|
|
|
|
|
|
Favored by commercial outfitters for its high strength-to-weight ratio, this 7.5" x 21.5" reinforced blade is fitted with a 1-1/8" aluminum shaft. The shaft is covered with high-density polyethylene to provide a grip that resists nicks, dents and oxidation, and gives a warmer feel than bare aluminum.
|
You can rely on this paddle's strength even in the most demanding whitewater. The Guide has a large (8" x 27") reinforced polyethylene blade, with a rugged 1-1/4" diameter shaft and T-grip.
|
|
|
|
PTC CANOE/RAFT PADDLE
|
|
CARLISLE DAY TRIPPER KAYAK PADDLE
|
|
AAA Price: $39.95
|
|
|
|
AAA Price: $49.95
|
|
|
|
|
|
Quality materials make the PTC paddle strong and dependable, ideal for recreational canoeing and whitewater rafting.
|
Asymmetric blades of polypropylene feature a dihedral shape for smooth, efficient strokes. A lightweight anodized aluminum shaft is ovalized for easy gripping. This is the paddle of choice for beginners - or for use as a backup. A push-button takedown allows blades to be feathered at 60-degress or inline, for right- and left-hand control.
|
|
|
|
CARLISLE MAGIC POLY-PRO KAYAK PADDLE
|
|
PTR TAKE-A-PART KAYAK/REC PADDLE
|
|
Our Price: $59.95
|
|
|
|
AAA Price: $69.95
|
|
|
|
|
|
Durable aluminum shaft makes this paddle a reliable introductory paddle. Fiberglass reinforced polypropylene blades are efficiently designed and offer impressive power when on the water. The blades are created using a gas assist injection method that helps to eliminate excess material and weight without sacrificing either strength or durability.
|
A great two piece paddle for beginning boaters or for use as a spare on big trips. Constructed of High-impact ABS plastic and Air grade aluminum this paddle will stand up to any abuse.
|
|
|
|
OAR TETHER
|
|
SPARE OAR KEEPER
|
|
AAA Price: $24.95
|
|
|
|
AAA Price: $14.95
|
|
|
|
|
|
Don't lose your oar. During an unexpected release from your pin or oarlock, this 3' polypro strap gives you a fighting chance to get the oar back in before the next wave. Stainless-steel rings secure the tether to oar mounts and oars. Quick-release 1" buckle for removing the oar when needed.
|
You're prepared for the worst by bringing along a third oar, but you'll need easy access to it when you have to move fast. The perfect solution is an NRS Spare Oar Keeper™ with its quick-release side buckle and large O-ring. Will fit Carlisle and Cataract Oars.
|
|
|
|
SAWYER COBRA OARLOCK - STANDARD
|
|
OARLOCKS STANDARD
|
|
Our Price: $36.95
|
|
|
|
Our Price: $24.95
|
|
|
|
|
|
This is the oar lock you've been waiting for. The cobra's wide horns have greater load area for much less stress on the oar-lock horns and increased durability. The elongated, oval opening allows for an additional 10-15 degrees of vertical range while keeping your oars snug in the locks. Made of a specially formulated bronze alloy for superior strength and proven by professionals throughout the world. Deluxe models are threaded with a lock-nut keeper to reduce play. Oars with rope wraps or oar sleeves can sometimes fit snugly in oarlocks. Compare the measurements under the Specs tab to those of your oar shaft to ensure a good fit with these oarlocks.
|
These basic oarlocks are excellent for recreational use in class III and lower rivers. Heavy-duty industrial-grade bronze-alloy ship screws are recycled to produce these strong oarlocks. The 5/8" diameter, 3-1/2" long shaft is precision-turned and drilled for a split ring. The horn opening is 1-5/8" with a 2-3/8" inside diameter. Oarlocks include Split Ring keepers. Sold individually or in pairs, so don't forget to order a spare. Oars with rope wraps or oar sleeves can sometimes fit snugly in oarlocks. Compare the measurements under the Specs tab to those of your oar shaft to ensure a good fit with these oarlocks.
|
|
|
|
SUPERSTON OARLOCKS by NRS
|
|
OAR RIGHT
|
|
Our Price: $32.95
|
|
|
|
AAA Price: $17.95
|
|
|
|
|
|
Made of Superston™, the strongest bronze alloy of its kind, these oarlocks are the finest for whitewater rowing. The horn opening is 1-5/8" with a 2-3/8" inside diameter. Shaft is precision-turned and drilled for a split ring. Oars with rope wraps or oar sleeves can sometimes fit snugly in oarlocks. Compare the measurements under the Specs tab to those of your oar shaft to ensure a good fit with these oarlocks.
|
Keeps your oar blade in the right position for full-power strokes.
|
|
|
|
MOLDED OAR SLEEVE
|
|
AAA OAR THOLE PIN & STIRRUP
|
|
AAA Price: $15.95
|
|
|
|
Our Price: $24.95
|
|
|
|
|
|
Protect your oar and tighten the open oarlock system with Molded Oar Sleeves. Injection molded polyethylene. Length 11"; inside diameter 1 7/8"; fits Carlisle HD or Cataract oar shafts. We recommend the use of Oar Rights or large Plastic Stoppers with your Molded Oar Sleeves.
|
The 12" Oar Pin and Clip Set is for folks who want a higher pivot point for their oars. When you want your oars held firmly in the vertical position - even in the biggest whitewater, you'll need pins and clips. A molded rubber safety bumper on top prevents injury. Replaceable PVC bushings protect pin and clip from wear. Powdered coated steel clip attach to the oar with two heavy-duty stainless steel hose clamps. Oar stirrups are recommended to prevent oars from getting away during tough maneuvers.
Oar Stirrups sold separately
Don't forget your spare oar clip, it's wise to carry a spare pin assembly in your repair kit.
|
|
|
